Publications on books and journals

Ubaldo Cella, Filippo Cucinotta and Felice Sfravara, “Sail Plan Parametric CAD Model for an A–Class Catamaran Numerical Optimization Procedure Using Open Source Tools”, in Advances on Mechanics, Design Engineering and Manufacturing, Lecture Notes series in Mechanical Engineering, pp 547 – 554, Sep. 2016, doi: 10.1007/978-3-319-45781-9_55.

Ubaldo Cella, Corrado Groth and Marco Evangelos Biancolini, “Geometric Parameterization Strategies for shape Optimization Using RBF Mesh Morphing”, in Advances on Mechanics, Design Engineering and Manufacturing, Lecture Notes series in Mechanical Engineering, pp 537 – 545, Sep. 2016, doi: 10.1007/978-3-319-45781-9_54.

Biancolini M. E., Costa E., Cella U., Groth C., Veble G., Andrejasic M., “Glider Fuselage–Wing Junction Optimization using CFD and RBF Mesh Morphing”, Aircraft Engineering and Aerospace Technology journal, Vol. 88, Iss. 6, Aug. 2016, doi: 10.1108/AEAT-12-2014-0211.

Biancolini M. E., Cella U., Groth C., Genta M., “Static Aeroelastic Analysis of an Aircraft Wind-Tunnel Model by Means of Modal RBF Mesh Updating”, ASCE’s Journal of Aerospace Engineering, Volume 29, Issue 6, November 2016, doi: 10.1061/(ASCE)AS.1943-5525.0000627.

Costa E., Porziani S., Biancolini M. E., Groth C., Cella U., Veble G., Andrejasic M., “Ottimizzazione aerodinamica di un aliante industriale mediante l’utilizzo di RBF”, A&C Analisi e Calcolo, N. 64, Sep 2014.

Ubaldo Cella, Michele Mancini, Giorgio Travostino, “Ottimizzazione dell’ala di un velivolo classe Business”, A&C Analisi e Calcolo, N. 56, May 2013.

Marco Evangelos Biancolini, Ubaldo Cella, Michele Mancini, Giorgio Travostino, “Shaping up – Mesh morphing reduces the time required to optimize an aircraft wing”, ANSYS Advantage, Volume VII, Issue 1, 2013.

Ubaldo Cella and Marco Evangelos Biancolini, “Aeroelastic Analysis of Aircraft Wind–Tunnel Model Coupling Structural and Fluid Dynamic Codes”, AIAA Journal of Aircraft, Vol 49, n. 2, pp. 407 – 414, March – April 2012, doi: 10.2514/1.C031293.

Ubaldo Cella, Domenico Quagliarella, Raffaele Donelli, Biagio Imperatore, “Design and Test of the UW–5006 Transonic Natural Laminar Flow Wing”, AIAA Journal of Aircraft, Vol 47, n. 3, pp. 783 – 795, May – June 2010, doi: 10.2514/1.40932.

Ubaldo Cella and Diego Giuseppe Romano, “Assessment of Optimization Algorithms for Winglet Design”, EnginSoft Newsletter Year 7 n°1 Spring 2010.

Ubaldo Cella and Arthur Rizzi, “Sensitivity to Physical and Numerical Modelling in Navier–Stokes Simulations”, ASCE’s Journal of Aerospace Engineering, Vol.13 Iss.2, pp. 47 – 51, Apr. 2000, doi: 10.1061/(ASCE)0893-1321(2000)13:2(47).

Conferences papers

Kapsoulis D. H, Asouti V. G., Giannakoglou K. C., Porziani S., Costa E., Groth C., Cella U and Biancolini M. E., “Evolutionary Aerodynamic Shape Optimization through the RBF4AERO Platform”, 7th ECCOMAS Congress 2016, 5 – 10 June 2016, Crete Island, Greece.

Bernaschi M., Sabellico A., Urso G., Costa E., Porziani S., Lagasco F., Groth C., Cella U, Biancolini M. E., Kapsoulis D. H, Asouti V. G., Giannakoglou K. C., “The RBF4AERO Benchmark Technology Platform”, 7th ECCOMAS Congress 2016, 5 – 10 June 2016, Crete Island, Greece.

Kapsoulis D. H, Asouti V. G., Papoutsis-Kiachagias E. M., Giannakoglou K. C., Porziani S., Costa E., Groth C., Cella U, Biancolini M. E., Andrejašič M., Eržen D., Bernaschi M., Sabellico A., Urso G., “Aircraft & Car Shape Optimization on the RBF4AERO Platform”, 11th HSTAM International Congress on Mechanics, 27 – 30 May 2016, Athens, Greece.

Cella U., Biancolini M. E., Groth C., Chiappa A., Beltramme D., “Development and Validation of Numerical Tools for FSI Analysis and Structural Optimization: the EU RIBES Project status”, AIAS 44th National Congress, 2 – 5 September 2015, Messina, Italy.

Viola I. M., Biancolini M. E., Sacher M., Cella U., “A CFD–Based Wing Sail Optimization Method Coupled to a VPP”, 5th High Performance Yacht Design international conference, 8 – 12 March 2015, Auckland (NZ).

Costa E., Biancolini M. E., Groth C., Cella U., Veble G., Andrejasic M., “RBF–based aerodynamic optimization of an industrial glider”, 30th International CAE Technologies, 27 – 28 October 2014, Verona (Italy).

Thomas Streit, Karl Heinz Horstmann, Géza Schrauf, Stefan Hein, Uwe Fey, Yasuhiro Egami, Jean Perraud, Itham Salah El Din, Ubaldo Cella, Jürgen Quest, “Complementary Numerical and Experimental Data Analysis of the ETW TELFONA Pathfinder Wing Transition Test”, 49th AIAA Aerospace Sciences Meeting, 4 – 7 January 2011, Orlando, Florida (USA).

Thomas Streit, Géza Schrauf, Itham Salah El Din, Ubaldo Cella, Uwe Fey, Yasuhiro Egami, “The TELFONA Pathfinder Model, A Second Look”, V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010, 14 – 17 June 2010, Lisbon, (Portugal).

Ubaldo Cella and Diego Giuseppe Romano, “Winglets design and assessment of optimization algorithms”, CAE Technologies International Conference. October 2009, Bergamo (Italy).

Roberto Fauci, Alessio Nicolì, Biagio Imperatore, Ubaldo Cella, “Wind Tunnel Tests of a Transonic Natural Laminar Flow Wing”, 25th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, 5 – 8 June 2006, San Francisco, California (USA), doi: 10.2514/6.2006-3638.

Ubaldo Cella, Domenico Quagliarella. and Raffaele Donelli, “Design and Optimisation of a Transonic Natural Laminar Flow Airfoil”, AIDAA (Associazione Italiana Di Aeronautica e Astronautica) XVIII National Conference, September 2005, Volterra (Italy).

Conferences presentations

Marco Evangelos Biancolini, Ubaldo Cella, Alberto Clarich and Francesco Franchini, “Multi-objective Optimization of A-Class Catamaran Foils Adopting a Geometric Parameterization Based on RBF Mesh Morphing”, EUROGEN2017 International Conference, 13 – 15 September 2017, Madrid, Spain.

Biancolini M. E., Cella U., Groth C., Chiappa A., Giorgetti F. and Nicolosi F., “Progresses in Fluid Structure Interaction Numerical Analysis Tools within the EU CS RIBES Project”, EUROGEN2017 International Conference, 13 – 15 September 2017, Madrid, Spain.

Andrejašič M., Eržen D., Costa E., Porziani S., Papoutsis-Kiachagias E. M., Kapsoulis D. H, Asouti V. G., Giannakoglou K. C., Cella U., Groth C., Biancolini M. E., Sabellico A., “Adjoint and EAs based aerodynamic shape optimization on industrial test cases using RBF4AERO platform”, 4th OpenFOAM User Conference, 11 – 13 October 2016, Cologne, Germany. (abstract)

Ubaldo Cella, Filippo Cucinotta and Felice Sfravara, “Sail Plan Parametric CAD Model for an A–Class Catamaran Numerical Optimization Procedure Using Open Source Tools”, JCM2016 International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, 14 – 16 September 2016, Catania, Italy.

Ubaldo Cella, Corrado Groth and Marco Evangelos Biancolini, “Geometric Parameterization Strategies for shape Optimization Using RBF Mesh Morphing”, JCM2016 International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, 14 – 16 September 2016, Catania, Italy.

Costa E., Porziani S., Biancolini M. E., Groth C., Cella U., “Structural Optimization of a Wing for Wind Tunnel Testing Through Mesh Morphing”, EASN 5th International Workshop on Aerostructure, 2 – 4 September 2015, Manchester (UK).

Gabriele Milanese and Ubaldo Cella, “Automotive Axial Flow Fans: modeling and design”, SCILABTEC2015, 7th International Scilab User Conference, 21 – 22 May 2015, Paris (FR).

Ubaldo Cella, Marco Evangelos Biancolini, Corrado Groth, “Reshaping the future of aircraft design using advanced mesh morphing RBF Morph”, Move The Future: future transport Challenges Workshop Energy efficiency and the environment, CIRA (Italian Aerospace Research Centre), 23 – 24 April 2015, Capua (CE), Italy.

Gabriele Milanese and Ubaldo Cella, “Automotive axial flow fans: design and optimization”, 30th International CAE Technologies, 27 – 28 October 2014, Verona (Italy). (abstract)

Marco Evangelos Biancolini, Ubaldo Cella, Michele Mancini, Giorgio Travostino, “Optimization of wing efficiency vs. sweep angles using mesh morphing”, 28th International CAE Conference, 22 – 23 October 2012, Verona, (Italy). (abstract)

Marco Evangelos Biancolini, Ubaldo Cella, Aniello Cozzolino, “Fluid Structure Interaction with RBF Morph: Aeroelastic Analysis of a Full Aircraft Model and Comparison with Experimental Data”, EFMC9 9th European Fluid Mechanics Conference, 9 – 13 September 2012, Rome (Italy). (abstract)

Ubaldo Cella, Diego Romano, Francesco Franchini, “Design and Numerical Optimization of Winglets of a Piaggio Aircraft”, AIRTEC 5th International Aerospace Conference, November 2 – 4, 2010, Frankfurt, (Germany).

Marco Evangelos Biancolini and Ubaldo Cella, “Coupled CFD–CSM Aeroelastic Analysis of a Full Aircraft Model and Comparison to Experimental Data”, 8th MIRA International Vehicle Aerodynamics Conference, 13 – 14 Oct. 2010, Oxford, (United Kingdom).

Miscellanea

Ubaldo Cella, “Setup and Validation of High Fidelity Aeroelastic Analysis Methods Based on RBF Mesh Morphing”, Ph.D. thesis, University of Rome “Tor Vergata”.

Ubaldo Cella, Francesco Salvadore, Raffaele Ponzini, “Coupled Sail and Appendage Design Method for Multihull Based on Numerical Optimisation”, PRACE – EU SHAPE Project final report, 5th July 2016, available online at www.prace-ri.eu.